LED Tubes

1510724365_maxresdefault.jpg

SWAY Night Club, Taiwan – MADRIX Professional 3 D Tubes



Roberto Malvaez does it again with an amazing 3D setup of SWAY night club. 432 360 Degree Vertical Tubes, 48 DMX Universes which MADRIX Professional handles with ease.

When your in Kaohsiuing Taiwan, make sure you visit SWAY Night Club

Info on Pixel Tubes

Visit http://tinyurl.com/asorlkb

Vertical DMX LED tube
¨ Lightweight plastic tube perfect for truss installation or ceilings
¨ 360° beam angle, available in clear and milky
¨ Equipped with 64 TCL LEDs, every tube is divided in 16 pixels with 4 LEDs each
¨ Functions: static colors, RGB color blend, internal programs, dimmer and strobe settings via DMX, Master/Slave
¨ Controlable via optional EUROLITE LED PSU-24V/10 DC controller needed for operating the unit
¨ 10 LED Pixel Tubes 360° can be used with one controller
¨ Ideal for discotheques and clubs

The MADRIX® brand brings professional LED lighting control solutions based on innovative software and hardware to the lighting market.

It is a powerful and intuitive Winrddows® software. MADRIX supports many well-kneown industry standards, such as DMX512, DVI, Art-Net, Streaming ACN, the Philips Color Kinetics and Insta/ROBE protocols, Eurolite T9, and ColourSmart Link. The application is both an effect generator and media server with outstanding capabilities to display unique real-time effects and stunning visuals using pixel mapping.

MADRIX can be used alone, or along with any DMX/MIDI console or desk.
Complementary MADRIX hardware reliably controls your LED installation via MADRIX–the centerpiece of our intuitive products. This provides a seamless integration of both software and hardware and high performance.

LED control by MADRIX – Music Makes the Light! – MADRIX # 1 in LED control worldwide!

http://www.facebook.com/InnerCircleDistribution

Home


http://twitter.com/InnerCircleDist

source

maxresdefault.jpg

Converting RV Lights to LEDs — PART 3 — 18″ Fluorescent Tubes



Convert your RV’s fluorescent bulbs to LEDs! It’s easy and we’ll show you how. We switched our incandescent and halogen lights to LEDs and now we’re converting our fluorescent fixtures too.

Our previous videos about LEDs have generated so much interest that we wanted to share the details about the new way we’re upgrading our fixtures. This video covers the steps needed to convert 18″ fluorescent tubes to beautiful new LEDs.

M4 LED Products is offering a special discount for RVgeeks viewers. Visit their website at http://M4Products.com and enter the discount code “RVgeeks5″ at checkout to receive a 5% discount on your entire order!

Watch the other videos in our LED Your RV series:
Part 1 – Incandescent & Halogen: https://youtu.be/3KF_Ig8sutg
Part 2 – LED Color & Brightness: https://youtu.be/jDYcODgaC_0
Part 4 – 12” Fluorescent Tubes: https://youtu.be/82xbqZXeBro
Part 5 – Docking & Patio Lights: https://youtu.be/fVl-gPaoZhA
Part 6 – Security, Entry & Reading: https://youtu.be/eajXathp57I

If you saw our original video about converting our RV’s fluorescent lights to LEDs (if not, you can view it here: http://youtu.be/SAMPQrAu0aI ), you may have noticed that it was quite a while before we shared any more tips about switching to LEDs.

The reason for that is because we were experimenting with converting our RV’s other lights (halogen, incandescent and even other fluorescent light options). But it was a bit frustrating, since options for LED color and brightness can be confusing, and many suppliers don’t accurately convey the information you need to choose the color temperature and brightness you want.

Then we heard about a company on the iRV2 discussion forums called M4 Products. The information on their website was really thorough, and the owner’s fast, detailed response to our questions made us confident that his lights would be the right color and brightness.

After so much trial & error, buying from M4 was the best experience we’ve had so far. Since we were heading toward southern California, where M4 is located, we made an appointment to stop by to see about upgrading more of our lights.

Being a fellow RVer, Steve, M4’s owner, was incredibly knowledgeable about LED applications for RVs, and the quality of his products was obvious. We’ve looked at, and tried, our fair share of LED bulbs, and Steve’s are the best quality and best value we’ve found so far.

Click here to visit M4 Products:
http://M4Products.com

To hear about new videos, giveaways and other great RVing content as soon as it’s released, visit our website and subscribe!
http://TheRVgeeks.com

The intro music is my own piano performance of Scott Joplin’s Maple Leaf Rag from 1899.

Full-Time RVers since April 11, 2003, we share DIY (do it yourself) RV maintenance, repair, travel, upgrade and operational tips & tricks.

While we’re not RV technicians, we’re very mechanically inclined and have learned a lot about RV systems over the years. We’ve handled most of our own minor service, maintenance and upgrade work on both of our RVs.

We meet lots of newer RVers who are eager to learn some basics about using, maintaining and caring for their rigs. After more than a decade on the road, we’re happy to share what we’ve learned (some of it the hard way). ;-) We hope our experience can help other RVers go DIY, saving time & money while experiencing the satisfaction of a job well done. We’re handy RVers, not professional technicians. We’re happy with the techniques and products we use, but be sure to confirm that all methods and materials you use are compatible with your equipment and abilities. Regardless of what we recommend, consult a professional if you’re unsure about working on your RV. Any task you perform or product you purchase based on any information we provide is strictly at your own risk.

We sometimes receive products for evaluation at no cost, but our opinions are our own and we only feature products we personally use, love and can recommend to friends with complete confidence. The RVgeeks participate in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

Comments welcome! Thanks for watching! Don’t forget to subscribe!

source

hqdefault.jpg

Microwave/Motion sensor LED T8 tube for car parks lighting projects



What is the best solution for huge energy saving in car parks and other all-day or long time continuous lighting areas? Please try our Smart Star Series Microwave Sensor LED T8 Tube Lights.

How does it work?
This is an improvement for LED lighting by our smart design.
Take our LED tube installed in a car park as an example, when you are driving a car closer and closer, the microwave sensor will receive the signal and transmit to let the light fully work at 18W. After the car parked ready and you left, our smart tube will automatically turn down at 4W for saving energy, and this level of illumination ensures for security monitoring.

www.kaiyeled.com
[email protected]

source

1507698238_maxresdefault.jpg

Agro Led Tube – Introduction



Agro-LED BV www.agroledtube.com

Ledverlichting
Het aanbod aan ledverlichting voor tuinbouw is veelzijdig en de ontwikkelingen gaan snel. AGRO LED BV biedt het ultieme spectrum, met dit spectrum bootsen wij iedere dag een zonnige lente dag na. Omdat wij glas gebruiken wordt het spectrum nog beter weergegeven dan wanneer men plastic LED buizen gebruikt.
Vanwege de vele voordelen wordt LED verlichting steeds vaker toegepast in plantengroeikamers, kassen en weefselkweekkamers – als voornaamste lichtbron of als energiezuinige aanvulling op bestaande lichtbronnen. Onder een onze optimale Full-spectrum belichting kunnen planten het jaar rond verbouwd worden – onafhankelijk van seizoensinvloeden of de beschikbaarheid van daglicht.

1 lichtrecept voor elk gewas
Het gaat al miljoenen jaren goed met het zonlicht dat wij hebben. Door onze lichtsamenstelling wordt smaak, kleur, afmeting en groeisnelheid beïnvloed. Daarnaast is gewas controle tijdens het gehele groeiproces mogelijk

Minder hitteproductie
Omdat ledverlichting minder warmtestraling geeft, kunnen de lampen dichter op de planten worden geplaatst. Dit vermindert lichtverlies en maakt een efficiëntere benutting van de ruimte mogelijk. Er is minder koelcapaciteit en ventilatie nodig om de ruimte op de gewenste temperatuur te houden. Armatuurkoeling zorgt voor een hoger rendement van de verlichting.

Eerste stap: efficiënt testen
Het is aangetoond dat onze verlichting voor elk gewas toepasbaar is. Of het nou Fresia kwekers, sla kwekers, komkommerkwekers of aardbeikwekers zijn, onze LED groeibuizen leiden tot een verhoogde respons van de plant. Onze glazen T8 LED buis heeft een kenmerkende impact voor elk gewas. AGRO LED BV biedt daarom belangstellenden een proefopstelling aan om efficiënt te kunnen testen op uw gewassen.

Overstappen naar ledverlichting
Overstappen naar LED verlichting wordt steeds makkelijker. Dit komt omdat onze glazen T8 oplossing niet alleen energie besparend is maar ook omdat het de meest betaalbare LED systeem is die er momenteel in de markt verkrijgbaar is. Een betaalbare en gemakkelijke manier om uw opbrengst te verhogen, uw plantkwaliteit te optimaliseren en uw energiekosten te verlagen. AGRO LED BV faciliteert een geleidelijke overstap naar ledverlichting.

Voordelen van Full Spectrum AGRO LED verlichting:

– Optimaal lichtspectrum
– Een full spectrum lichtrecept garandeert een optimale groeicyclus

– Stabiliteit:
Produceert een consistent spectrum voor een breed temperatuurbereik en een gelijkmatige verdeling zonder temperatuur hot-spots

– Langere levensduur:
Tot zes keer langer dan conventionele verlichting

– Energiebesparing:
Lagere operationele kosten voor verlichting, koeling en ventilatie (stroom)

– Doorlaatbaarheid van het licht:
Door middel van glas te gebruiken voor de LED buizen wordt het spectrum nog beter weer gegeven

Kijk voor meer informatie over de Agro LED tube op www.agroledtube.com

source

1506487841_maxresdefault.jpg

24″ LED Snowfall Tubes – Blizzard Tubes – Animated LED Christmas Lights



24″ LED Snowfall Tubes work great in the foliage of a tree or along the perimeter of a building. They come in 12″, 24″ or 36″ lengths. Mix and match sizes for a more interesting look. Each tube screws directly into a standard C9 socket. We have light line that can be purchased by the foot or in spools with bulb spacing starting at 6″ and going up to 36 inches between bulbs.

Check Out Snowfall Tubes on Our Website: http://store.christmasdesigners.com/LED-Christmas-Lights/LED-Falling-Snow-Icicle-Lights/

source

1505277777_maxresdefault.jpg

First look and review of InnLight LED Falling Rain Lights with 30cm 8 Tubes, 144 LEDs



This is my review/impression of the InnLight LED Falling Rain Lights with 30cm 8, Tube 144 LEDs, Meteor Shower Light, Falling Rain Drop Christmas Light, Icicle String Light for Holiday, Party, Tree Decoration (Blue)

I purchased 6 sets of these to put in my trees in the front yard to go with my large Christmas display. Honestly after receiving them and seeing how nice in person they look I’m thinking I really didn’t get enough of these.
I got the all Blue version. I believe they come in white and multi-color but for my purposes of decorating I thought the blue would look best and I
made the right choice! They are bright and a nice color blue.
I’ve seen a couple of other reviewers claiming there are only 17 lights per tube when there is supposed to be 18 but I can assure you there are 18 bulbs per tube. I think they are missing the very last one at the bottom. I have tested the six boxes I purchased and all LED’s are working (No DOA or burned out bulbs)
Each are approx. 12″ long and the strip inside holding the LED’s has cutouts for each bulb so the light comes out both sides and will look nice whatever way they may end up hanging.
They appear to be waterproof (I won’t know for sure until I have them up in my trees this next Christmas) except for the plug-in transformer which I believe the vendor states in his description. I will be using these outdoors so I fashioned a small plastic case that some drywall screws came in and cut a hole for the cord to come out. I think it will keep the plug/transformer safe from water.
Someone else talked about wanting wave patterns or something like that which is a personal opinion that might look OK if you have these neatly spaced apart in a straight line I suppose. I think most people will have these randomly placed in trees and such and having certain patterns run on them wouldn’t look good. I think they are perfect they way they are. I hope to revise my review with them actually setup in my trees this Christmas.
I received this at a discount in exchange for and honest and unbiased review. My review is based solely on my opinion of the quality and vendors description of the lights and nothing else.

source